Specifications

Table:
Grey cast iron, Y-21”(533mm) X-26” (660mm) T-Slot: 5/8” (16mm)
T-Slot spacing: 4”( 101.6mm) Center to center, 5 slots. Maximum load on table: 350lbs (158kgs)

Spindle:
HSK-E40 tool interface
Rating: 10 kW – 42,000 RPM (cw-ccw)– 100% duty.

Torque:
4.77 lbs @ 14700 rpm (6.5Nm)

Voltage:
240/480 volts (acceleration/deceleration) 2.5 /2.5 second water cooled.

Hybrid ceramic bearing, vibration measuring system on 3 axis (“G” meter) Feed rate:
500 in/min (12 m/minutes)

Tools Changer:
255.Tools maximum, “On the fly” Interchangeable 16 tools Tray system (*)

Air required:
100 psi / 6.5 cfm ( 6.8 bar / 183L/min)

Coolant:
Removable 57 Gal (215 liters) coolant cart with integrated filtration system (cartridges).

Chiller:
Heat exchanger, digital control.

Mist control:
Turbine unit with Hepa filter.